D H E A - 3 6 8 4 0 D E S K S T A R 5 IBM
Native| Translation
------+-----+-----+-----
Form 3.5"/SLIMLINE Cylinders |12592|12592|
Capacity form/unform 6840/ MB Heads 8| 16| 15|
Seek time / track 9.1/ ms Sector/track | 63| 63|
Controller IDE / ATA3 Precompensation
Cache/Buffer 476 KB ADAPTIVE Landing Zone
Data transfer rate MB/S int Bytes/Sector 512
33.300 MB/S ext UDMA
Recording method operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 55 | -40 65
Power: sleep W Humidity % 8 90 | 5 95
standby W Altitude km -0.300 3.048| -0.300 12.000
idle W Shock g 10 | 75
seek W Rotation RPM 5400
read/write W Acoustic dBA
spin-up W ECC Bit ON THE FLY,SMART
MTBF h
Warranty Month
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
IBM DHEA-34300/36480 JUMPER SETTING
+---------------------------------------------------------------+
| |
| |
| +--------------------------------------1---G-----A-+------1-+ |
| |* * * * * * * * * * * * * * * * * * * * * * * * * |X X X X | |
| |* * * * * * * * * * * * * * * * * * *+-+* * * * |X X X X | |
+-+------AT-INTERFACE---------------------+ +-JUMPER-+-POWER--+-+
**********************************************************************
J U M P E R S
**********************************************************************
IBM DHEA-34300/36480 JUMPER SETTING
Jumper Setting
==============
+---------------------------------------------------------------+
| |
| |
| +--------------------------------------1---G-E-C-A-+------1-+ |
| |* * * * * * * * * * * * * * * * * * * * * * * * * |X X X X | |
| |* * * * * * * * * * * * * * * * * * *+-+* * * * |X X X X | |
+-+------AT-INTERFACE---------------------+ +H-F-D-B-+-POWER--+-+
Jumper
Interface Connector 3M 3417-7000 or equivalent
16 Logical Head 15 Logical Head
--------------- ---------------
G E C A G E C A
X * * X Device 0 X * xxx
X * * X (Master) X * * *
H F D B H F D B
G E C A G E C A
* * X X Device 1 * * xxx
* * X X (Slave) * * * *
H F D B H F D B
G E C A G E C A
* X * X Cable Select * X xxx
* X * X * X * *
H F D B H F D B
G E C A G E C A
X * * X Device 1 X X * *
X * * X (Slave) X X * *
H F D B Present H F D B
All other jumper setting patterns are reserved. Do not make other
settings.
Shipping default settings:
16 head logical architecture is enabled. Master is set to on (i.e.
jumper on pins A-B and G-H. No other jumpers are fitted.
**********************************************************************
I N S T A L L
**********************************************************************
IBM DHEA-XXXX DESKSTAR 8
Notes on installation
=====================
Installation direction
----------------------
horizontally vertically
+-----------------+ +--+ +--+
| | | +-----+ +-----+ |
| | | | | | | |
+-+-----------------+-+ | | | | | |
+---------------------+ | | | | | |
| | | | | |
| | | | | |
+---------------------+ | +-----+ +-----+ |
+-+-----------------+-+ +--+ +--+
| |
| |
+-----------------+
The drive will operate in all axis (6 directions).
Mount the drive securely, using the appropriate brackets or rails, in
any axis, using four 6-32 UNC metric screws in either bottom or side
mounting holes.
The max. screew insertion depth for th ebottom mounting is 5.5mm
(0.21 inch) and for side mounting 3.5 mm (0.14 inch).